Products

Products

MAXAIR® Systems provides a turn-key solution for combined respiratory and contact protection for applicatons requiring protection against particulate contaminants. Durable Systems, low cost disposable Face and Head Covers, and Accessories, even the unique MAXAIR CART for mobile deployment, security, and storage, all provide a comprehensive solution across numerous markets and applications. 

MAXAIR PAPRs (Powered Air Purifying Respirators) are leading edge Integrated Helmet designs that eliminate the need for long air tubes connecting to large belt mounted blower units. This results in increased safety during use, greater manueverability, less decon time and effort, more user comfort and convenience, and lower long-term operational costs.

Systems

CAPR® Series

78SP Series

300TS Series

The CAPR Series addresses more applications with greater cost effectiveness. 

The MAXAIR 78SP Series provides fundamental capabilities for a large number of markets The MAXAIR 300TS Series is focused to Bio-Medical Research requirements.

 

Face and Head Covers

(Click on a System Series above to match a System with the appropriate Face and Head Cover)

Cuffs

Shrouds

Hoods

 Cuff Shroud Hood

Provide full face protection and allow convenient stethoscope use. Provide full face and head coverage for full respiratory and contact protection. Provide full face and head protection and fully cover the entire helmet to minimize decon time and effort.

 

Accessories

Helmet

Power and Charging

Deployment and Storage

Helmet accessories include Power Cord options, Comfort Strips, Liners, etc. Power options included an 8-10 Hour/Charge and a 16-20 Hour/Charge Li-Ion Battery.
Charging options include a single and a 6-Gang Charger.
The MAXAIR Cart provides rapid deployment, storage, and security for up to six MAXAIR Systems and typical accessories and routinely needed support items.

The CAPR® Series is MAXAIR's most innovative line for the broadest range of applications and most economical respiratory and contact protection solutions. MAXAIR 2365 02 System Beauty MelissaCAPRs meet todays needs and tomorrows expectations.  

CAPR System applications range from routine daily use, while caring for patients in health care facilities, to industrial and manufacturing situations. 

CAPR System configurations range from unique, Snap On - Snap Off DLC cuffs to full Helmet coverage High Performance XP Hoods.

Common to all CAPR System configurations is the integrated CAPR Helmet with unique always on and visible during use safety LEDs. This unique design eliminates the need for a long air tube and a large belt mounted blower unit.

 

MAXAIR provides unprecedented overall safety, comfort, convenience, patient friendliness, and cost effectiveness versus Mask respirators and Conventional PAPRs.

 

The MAXAIR 78SP Series provides fundamental configuration options for varied markets and applications. 2260 01 Shroud System Lorenzo

78SP Series Option configurations address needs for Healthcare, Nuclear, Bio-research, and many industrial applications.

Configurations include cuffs, shrouds, and hoods.

Common to all 78SP Series configurations is the integrated MAXAIR Helmet with unique always on and visible during use safety LEDs. This unique design eliminates the need for a long air tube and a large belt mounted blower unit.

MAXAIR provides unprecedented overall safety, comfort, convenience, patient friendliness, and cost effectiveness versus Mask respirators and Conventional PAPRs.

The MAXAIR 300TS Series is configured with the 2120-10 Double Shroud Hood.2120 10 SYSTEM Beauty Magoo

The double shroud hood provides extra safety and higher protection levels due to the added sealing. The inner shroud is tucked inside the outer gown, and the outer shroud is layered over the outer gown and secured with a tie.

The 300TS-30 is particularly suited for Bio-Research applications.

MAXAIR's unigue integrated Helmet, including always on and visible during use safety LEDs, eliminates the need for a long air tube and a large belt mounted blower unit, and provides unprecedented overall safety, comfort, convenience, and cost effectiveness versus Conventional PAPRs.

Helmt-to-Battery Power Cords

2590 01 Straight

2590-01 Straight Power Cord
Package of 1

 

2590 02 Right Angle

2590-02 Right Angle Power Cord
Package of 1

 

Front Headband Comfort Strips

ComfortStripsFingers

 2000-201 Comfort Strips
Package of 36
1 Full strip for the front headband on all Helmets.
1/2 strip (Full cut in half) for all 78SP and 300TS Series Helmets.

 

Helmet (Hanging) Hooks

2000 204 on wall

 2000-204 Helmet Hooks
Package of 6, with mounting screws

 

2070-03 Helmet Replacement Liner

Liner Transparent

 2061-03 Helmet Liner for 2070-03 Helmets

 

Liner Replacement Foam Pads 

FoamKit

 2000-206 Helmet Liner Foam Pad Kit for CAPR Helmets
Includes 2 Liner front pads, 2 Liner rear pads, 1 rear headband Comfort Pad
For 2070-03 and 2075-03 CAPR Helmets

Single Li-Ion Battery Charger

2600 01

2600-01 Single Battery Charger
Integrated Charger and Power Supply
Green-Red Charging Status Indicator

 

6-Gang Li-Ion Battery Charger

6 gangCharger

 2601-06 6-Gang Charger for charging six MAXAIR Li-Ion Batteries simultaneously from a single wall plug outlet
Includes six integrated 2600-01 Charger-Power Supply single charging stations
Includes wall mounting hardware

 

6-Gang Li-Ion Battery Charger Bracket

2601 06B 6 Gang Bracket

 2601-06B 6-Gang Charger bracket for use with optionally purchased 2600-01 Chargers
Includes 6-Gang Power Cord
Includes wall mounting hardware

Six System Mobile Cart

2015 08 19 Cart for Web

1-2 System Carry Bag

Carry Bag

2000-SB Carry Bag
Room for 1 or 2 MAXAIR Systems including Helmets, Batteries, Belts, and Chargers
Space for small number of Head and Face Covers

 

 

 

 

 

 

 

 

 

S5 Box

Register

You need to enable user registration from User Manager/Options in the backend of Joomla before this module will activate.