Other Parts & Accessories FAQ's
Cuffs: Barrier Material and polyurethane/polypropylene.
Shrouds: White portions are polypropylene; Blue portions are polypropylene/polyurethane/polyethylene.
Hoods: Polypropylene, polypropylene modacrylic blend.
Polycarbonate and PETG (DLC Cuffs)
MAXAIR Helmets uniquely channel the airflow down the inside of the lens, in front of the user’s face, maintaining a "fog free" lens and providing a cooling effect to the wearer.
The Velcro backed foam strips are for comfort and hygiene on MAXAIR Systems.
Replace the comfort strips by simply pulling off the used ones and pressing on the new strips.
The CAPR Systems utilize a removable front headband comfort strip. The rear headband has a "cleanable" closed-cell foam strip that does not need routine replacement.
One 2000-201 Box contains 36 Comfort Strips, sufficient for 36 changes
MAXAIR Systems has the following available and are described on our website, maxair-systems.com in the section MAXAIR CAPR > MAXAIR COMPONENTS > Storage And Deployment:
Cleaning & Decontamination
Please refer to your institution’s standard operating procedures for cleaning surfaces with blood or bodily fluid contamination.
For general cleaning of MAXAIR Helmets, Batteries, Chargers, Liners, Helmet Covers, and Power Cords, recommendations include a clean damp cloth and a mild application of a skin friendly soap.
For high level cleaning, MAXAIR recommends two alternatives –
- PDI Super Sani-cloth Germicidal Disposable Wipe, Q55172
- Clorox Healthcare Hydrogen Peroxide Cleaner Disinfectant, CLO30825
All MAXAIR Face/Head Covers are single use items and are not designed for cleaning and reuse.
MAXAIR Filters and Pre-Filters should be discarded as contaminated waste if they cause the Helmet Yellow LED to be lighted when the Helmet is powered on for more than about 10 seconds, as well as whenever soiled or otherwise contaminated with body fluids or visibly damaged.